2020年比利时第一届结构损伤建模与评估国际会议

meeting

2020年比利时第一届结构损伤建模与评估国际会议
1st International Conference on Structural Damage Modelling and Assessment (SDMA 2020)
会议时间: 2020年8月4日-5日
会议类型: 工程
所在国家: 欧洲 - 比利时 - 根特
会议地址: 比利时根特大学
会议简介
    首届结构损伤建模与评估国际会议（SDMA 2020）将在比利时根特举行。会议的总体目标是召集学术界和工业界的国际科学家和工程师，参与与损伤建模，损伤检测和评估，无损检测和评估，结构完整性和结构健康监测有关的领域。会议涵盖了所有与理论，数值和实验技术有关的结构损伤建模和评估的研究主题和应用。
    摘要提交截止日期：2020年1月31日
    全文提交：2020年3月15日
    修订论文截止日期：2020年4月21日
    作者注册截止日期：2020年5月15日
会议主题
Damage Modelling
Damage detection and assessment
Damage in composite and smart materials
Damage in civil engineering structures
Damage in machineries
Damage in renewable energy systems
Structural health monitoring
Non-destructive testing and evaluation
Structure integrity
Signal processing
Fracture and damage mechanisms
Fatigue damage
Case studies
详细介绍
Keynote Speaker
Prof. Luca Susmel
Professor of Structural Integrity, the University of Sheffield, UK
Luca Susmel studied his undergraduate degree in the Department of Mechanical Engineering at the University of Padova, Italy, and completed his PhD between Padova and Dublin, Ireland.
From 2001 to 2011 he spent at least six months every year lecturing and doing research in the Department of Mechanical and Manufacturing Engineering at Trinity College, Dublin. In 2005, he was appointed Associate Professor in Structural Integrity at the University of Ferrara, Italy. He joined the Sheffield Department of Civil and Structural Engineering in 2011 to continue his research on the fatigue and fracture behaviour of engineering materials, components and structures.
Speech Title: An advanced elasto-plastic approach to design notched metals against variable amplitude multiaxial fatigue loading
Abstract: An advanced fatigue lifetime estimation technique suitable for assessing variable amplitude multiaxial fatigue strength of notched metallic materials is formulated and validated using a large number of experimental results we generated in our laboratory. The proposed design approach takes full advantage of the Modified Manson-Coffin Curve Method, the Shear Strain-Maximum Variance Method and the elasto-plastic Point Method. In order to assess the accuracy of this new fatigue lifetime estimation technique V-notched cylindrical specimens made of unalloyed medium-carbon steel En8 were tested under proportional/non-proportional constant/variable amplitude axial-torsional loading. Thanks to this validation exercise, it was seen that the usage of our advanced fatigue lifetime assessment approach results in accurate estimates, with this holding true independently of sharpness of the stress/strain raiser and complexity of the load history.
Prof. Gilbert-Rainer Gillich
Professor of Mechanics in the Faculty of Engineering and Management at „Eftimie Murgu” University of Resita, Romania
Prof Gilbert-Rainer Gillich is a full time Professor of Mechanics in the Faculty of Engineering and Management at "Eftimie Murgu" University of Resita, Romania. He received his M.Sc. in Mechanical Engineering (1986) and his Ph.D. in Strength of Materials, Elasticity and Plasticity (1999), both from Politehnica University Timisoara, Romania. His research interests include damage detection, condition monitoring and vibration control including base isolation.
Speech Title: A model to predict the evolution of the natural frequencies of a beam due to damage: the equivalent healthy beam
Abstract: Structures change their dynamic behavior when affected by various types of damage. The challenge of scientists and practitioners is to identify the position and severity of the damage, but this is hampered by the fact that the nature of the defect is not known a priori. In reality, these three characteristics cannot be evaluated separately. In most cases, when we intend to identify the position and severity of the damage, we assume a certain type of deterioration depending on the nature of the structure and the operational and environmental tasks acting on it.